Flowcoat is a top coat resin containing wax, fillers and pigment. The wax allows the flowcoat to be added as a top coat to existing project surfaces. Commonly used for finishing and repairing polyester and vinylester projects (not suitable with epoxy projects). Flowcoat can be applied by a brush or roller and once tacked off (typically after 20min) can be sanded. Flowcoat is not compatible with epoxy materials.
Flowcoat is available in 1L or 4L and comes in a variety of colours.
Flowcoat requires Catalyst MEKP at 2% to enable it to harden (SOLD SEPARATELY)
Catalyst guide (equates to 2% mixture plus extra if needed) :
250mL of flowcoat can be purchased with 10ml MEKP Catalyst 1L of flowcoat can be purchased with 30ml MEKP Catalyst 4L of flowcoat can be purchased with 100ml MEKP Catalyst